40mm Height MAX Pneumatic Driver Guilotine Blade PCB Panels Depaneling Machine
Introduction
1. Pneumatically driven and electric control , sample design. There have sensor device in the machine ,cuttting board one time with lowest cut stresses.HS-310 apply for separate precise SMD PCBA or thin plates.
2. The straight knife type separator machines were designed to separate pre-scored panel boards carefully, without bending or tension stress. Even sensitive SMD-components like ceramic capacitors will not be damaged by the separate process,improve products quality .
3. Due to the special design of the blade ,boards with high components placed close to the edges can be separated safely. Based on a proven method of separating, wedge-shaped knives are used to cut the panels within the groove. This enables boards of less than 1 mm thickness to be separated safely and without cutting stress.
Features
1. Cutting force stress under 500, No vibration and noise during cutting process to prevent precise components damage.
2.Pneumatic driver ,solenoid vale controlled , high speed.
3.The up and lower blade height are adjustable , Gap for insertion of the PCB board can easily be adjusted by adjusting knob in the top side of the machine.
4.Lower blade height adjust front and real portion can be adjusted separately, don't need shim , which make change and adjust blade more easy . The blade can sharpening many times, lower cost .
5.The PCB or thin plate without v-grooved can customized tray and prevent stay positioning device.
6.Operation and maintenance can be done also by unskilled personnel .
Specification
| Product name | PCB depanelizer |
| Model | HS-310L |
| Part-up height | Max 40mm |
| Part-down height | Max 20mm |
| Air supply | 5Kgf/cm |
| Output | 12.5tons(gross) |
| Efficient cutting length | 1-360mm |
| Linear blade size | 360*43.5*6mm |
| PCB thickness | 0.1mm~2.0mm(With v grove)
0.1mm ~1.0mm(Without V grove ) |
| Blade material | Import high quality high speed steel tool |
| Separating speed | 1-300mm/s |
| V-cut thickness | 0.3-3.5mm |
| Air consumption | 200-400(L/min) |
| Machine size | 700*325*400mm |
| Weight | 130kg |
| Suitable board | All V-cut boards |
Application boards
SMT production line equipment
1, PCB loader: PCB is placed in the Rack to automatically feed the board to the suction board machine.
2, suction board machine: automatically suck PCB placed on the track, transfer to the printing machine.
3,Printing machine: the laser steel on the steel paste or red glue complete printing on the PCB.
4,High-speed mounter: Use the equipment to edit the procedure to mount the components in the specified parts position, can be mounted SOP 28pin rolled parts, which is characterised by fast mounting speed.
5,Connecting table:Transferring the PCB board device.
6, general mounter: the use of equipment edited by the program will be components mounted on the specified parts position, can be mounted SOP 28pin or more (including high-speed machine can be mounted components) rolled, disc or tube packaging components. It is characterised by high mounting accuracy and diversity, but the mounting speed is inferior to that of high-speed machines.
|
|
Pneumatic Guilotine Blade PCB Separator, 40mm Height MAX, Cut Stress < 500 Images
|
